| |
 |
| Microcomputer variable voltage/variable frequency control |
| When the elevator has traveled to the selected floor and stopped, if the door is unable to open, the elevator will automatically travel to the next floor and stop, and open the elevator door to let passengers leave. |
|
 |
| Auto stop at nearest floor during malfunctioning |
| Due to an unforeseen reason that causes the elevator to break down (not under a power failure condition) and the car has stopped between two floors, the computer will be able to detect automatically and after ensuring that it is safe, it will activate the main engine to run at low speed to stop the car at the nearest floor, and open the door to let passengers leave. |
|
|
| Car auto reversing function |
| While opening/closing the elevator door, if a passenger's body or belonging has been gripped by the door or the threshold has caught a foreign object, the computer will be able to detect it and reverse the elevator door to avoid injuring the passenger's body or belonging. |
|
|
| Disorderly button pressing prevention device |
| To avoid passengers in car touching the button by mistake or pressing too many buttons, and if the passenger weight in car is less than 80kg and that more than one buttons have been pressed, the elevator will eliminate all button signals. |
|
|
| Auto off of illumination and ventilation fan |
| Within a set up time where no passengers are in the elevator, it will automatically switch of the car's illumination and ventilation fan. |
|
|
| Next level stops function |
| When the elevator has traveled to the selected floor and stopped, if the door is unable to open, the elevator will automatically travel to the next floor and stop, and open the elevator door to let passengers leave. |
|
|
| Full-automatic pick up/drop off passengers orderly |
| The elevator will initially register call buttons of different floors, and will first travel up or down according to the registered calls by automatically selecting the floors to stop in the same direction orderly. After picking up or dropping off all passengers in the same direction, it will then return to pick up or drop off passengers in the opposite direction. |
|
|
| Security brake |
| Before the elevator traveling speed has exceeded 1.4 times of rated speed, the elevator will start the security brake device to halt the elevator safely. |
|
|
 |
